alot of output drops after applying Qos

[ahmadali7]

Hi Guys,

I have issue when I  apply "mls qos"  in the switch , the output drops start come in solarwinds and in the interface it self.

I have configured the interface(ethernet 1Gb) as below:

interface gig 0/1

speed 10

srr-queue bandwith limit 50

to get 5 Mbps downlad .

is this will make a network congestion or its normal (Output drops)?

if there is a way to stop the output errors please advice me?

Thanks in advance

[kenjoh725]

What is the source device?  That's more important than the destination device.

[ahmadali7]

Hello Ken Johnson,

the source is PC. and thanks for the reply.

your advice is highly appreciated

Regards,

Ahmad Mestarihi