cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1869
Views
0
Helpful
4
Replies

ARP issue

Haris P
Level 4
Level 4

Dear al ,

I run debug arp for one interface and im getting below error . The CPU is running high due to this .

I dont have any IP configured as 192.168.0.13 in my interface but the mac address  00d0.2b14.ed00 is that of my router

Mar  5 08:58:08.022: IP ARP req filtered src 192.168.0.13 00d0.2b14.ed00, dst 192.168.0.14 0000.0000.0000 it's our address
Mar  5 08:58:08.022: IP ARP req filtered src 192.168.0.13 00d0.2b14.ed00, dst 192.168.0.14 0000.0000.0000 it's our address
Mar  5 08:58:08.022: IP ARP req filtered src 192.168.0.13 00d0.2b14.ed00, dst 192.168.0.14 0000.0000.0000 it's our address
Mar  5 08:58:08.022: IP ARP req filtered src 192.168.0.13 00d0.2b14.ed00, dst 192.168.0.14 0000.0000.0000 it's our address
Mar  5 08:58:08.022: IP ARP req filtered src 192.168.0.13 00d0.2b14.ed00, dst 192.168.0.14 0000.0000.0000 it's our address

4 Replies 4

Reza Sharifi
Hall of Fame
Hall of Fame

So, the issue is High CPU? If yes, do you have command like this in your config?

ip route 0.0.0.0 0.0.0.0 Fastethernetx/x

There is nothing like  " ip route 0.0.0.0 0.0.0.0 Fastethernetx/x " ,even no other route pointing to interface

Tharak Abraham
Level 3
Level 3

Have you connected a Hub/L2 switch to the router with hosts attached ?

Looks like the frame is looping back to the router since there is no hosts with the dest ip add.

Just a thought though.

Hi,

00d0.2b14.ed00,

is a JETCELL mac it is a mobile phone acquired by cisco and it seems he is doing an arp request for  .0.14 which seems to be the router IP.

Can you do a sh ip int br and a sh cdp nei ?

Regards.

Alain.

Don't forget to rate helpful posts.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: