Hello everyone,
I'm having some trouble wrapping my head around how to accomplish something in my lab. Right now I have an ASA5510 configured with eth0/0 as my outside (dhcp), eth0/1 as my inside (10.10.10.0/24 with DHCP), and eth0/2 as my dmz (172.20.5.0/24.) From port eth0/1(inside) on the ASA, I go to Port 1 on my HP ProCurve 1800-24g and from port eth0/2(dmz) on the ASA I go to Port 2 on my 1800-24g. On port 22, I am going to my server (Intel Nuc running ESXi) which has only a single NIC.
What I am looking to do is present the 10.10.10.0/24 (inside) network AND the 172.20.5.0/24 (dmz) networks to the ESXi host over that single port 22, so that I can configure web services in VMware to run in the DMZ, while other servers run on the LAN or inside. I'm stuck on how to accomplish that exactly. I'm not sure if I need to create vLANs on the ASA and pass them as tagged traffic to the HP, or if I can just pass the interface IPs. I have DHCP configured on my inside interface, but not my DMZ, so the 10.10.10.0/24 passes through without a problem, I am just having trouble passing the 172.20.5.0/24 block over.
Any help or suggestions you have would be greatly appreciated.
Thanks!
Mike T.
