07-21-2017 04:48 AM - edited 03-08-2019 11:25 AM
Hello,
I need advice please how to Setup ASA5515 Ha pair . There is a L3 switch which is directly connected to the ISP router and in the Same switch there is a server + ASA5515 x2 needs to be attached. but i am now sure how to do that.
07-21-2017 05:27 AM
07-21-2017 05:32 AM
Thanks Karsten for the reply ,
But what about the Inside network . Suppose if the serve is behaving as a Inside network how do i configure it .
07-21-2017 08:06 AM
Hello,
In addition with Karsten, a 3rd option would be to redesign what you have by putting the ASAs between the ISP and L3 switch.
As for ASA HA configuration, you can refer to: http://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ha_active_standby.html
As for inside network, you simply specify which interface is inside and which is outside. You can refer to: http://www.networkstraining.com/cisco-asa-5506-x-configuration-tutorial-guide/. Granted its for 5506 but its close enough to get you started.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide