cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1192
Views
0
Helpful
2
Replies
Highlighted
Beginner

Assigning VLANs on Catalyst Express 520

Hello there,

I've trouble configuring a Catalyst Express 520 8PC Switch. Could it be, that it is not possible to assign different VLAN than "1" to the access ports of this switch? I hope it is possible and I simply haven't found this option yet. If it is, can someone please refernce to some whitepaper or guide (or simply explain how and where it has to be done)?

I've tried it either over the web-fronend and also over CCA/CNA (sadly there isn't any cli support) and didn't found any point in the configuration.

with kind regards

Nico Schmidt

Everyone's tags (5)
1 ACCEPTED SOLUTION

Accepted Solutions
VIP Expert

Assigning VLANs on Catalyst Express 520

Hi,

According to the data sheet, the 500 series supporsts up to 32 vlans.

here is link on how to add/delete vlans:

http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml#vlans

HTH

View solution in original post

2 REPLIES 2
VIP Expert

Assigning VLANs on Catalyst Express 520

Hi,

According to the data sheet, the 500 series supporsts up to 32 vlans.

here is link on how to add/delete vlans:

http://www.cisco.com/en/US/products/ps6545/products_configuration_example09186a00806da6c9.shtml#vlans

HTH

View solution in original post

Beginner

Re: Assigning VLANs on Catalyst Express 520

Thanks a lot! I didn't recognize the Smartport configuration as the place for assigning VLAN.

wbr Nico Schmidt

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards