ATM Over Ethernet not working

[murugananthamamir]

I'm using 3640 router running on c3640-js-mz.124-25d.bin IOS.

I'm using  NM-1A-OC3SML=  (ATM OC3, long reach single mode)  interface card. Now my pc is connected an fast ethernet interface of the router. Need to know the ATM configuration on this cisco 3640 router in order to achieve the ATM over ethernet traffic get success. As of now i've confugred as below but it's not working it seems. please guide that how to do the configurations for this requirement. plz help me ....

interface ATM2/0

bandwidth 120000

ip address 10.2.2.1 255.255.255.0

no atm ilmi-keepalive

pvc 0/36

  protocol ip 10.2.2.10 broadcast

  cbr 70000

  encapsulation aal5mux ip

Ans also please let me know the correct encapsulation type for the connectivity.

[paolo bevilacqua]

Check interface/controller statu. For correct encpsulation, consult with the organizaion handling the other side of the circuit.

Note all this will not do ATM over ethernet.

[murugananthamamir]

Thxz for the reply . Now it's working after changing the fast ethernet card. Thxz a lot for your support