03-20-2008 05:38 AM - edited 03-05-2019 09:52 PM
We are experiencing problems with gig switches (3750 & 6500) when set to fixed 100MB/Full duplex.
Can anyone point me to a good document with recommendations? I vagely remember something about leaving gig interfaces on auto, but i can't remember why...
Solved! Go to Solution.
03-20-2008 05:53 AM
Hi,
This is interesting:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml
I hope this helps.
Best regards.
Massimiliano.
03-20-2008 05:53 AM
Hi,
This is interesting:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml
I hope this helps.
Best regards.
Massimiliano.
03-20-2008 06:02 AM
Great, exactly what i was looking for!
Thnx...
03-20-2008 06:04 AM
You're welcome.
Massimiliano.
03-20-2008 06:54 AM
YOu can hard set them but you need to do it at both ends. Are you sure it's not a cable or MDI/MDIX problem?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide