Autonomous access point

[Sivakanth Akkapu]

Hi,

Can someone help me urgently

AP(it's 1130AG) is not pinging from access switch even it's formed neigbhourship

when i issued the command "Sh cdp nei" it's showing on my access switch but not pining from switch

i checked vlan and ports status everything is fine.

please helpme urgently

im on production......                  

[John Blakley]

Can you post the config of the AP? Has it ever worked or is this a new install?

[Sivakanth Akkapu]

Yes,this is new install

[John Blakley]

We can't help you if you don't tell us addressing information, configurations, etc...CDP is a l2 protocol which only tells us that that part is working. Other than that everything would be purely a guess. Again, can you post the config of the AP?

[Ven Taylor]

Can you ping the AP from anywhere else?

What is the switch port config for the AP?

Is this a good vlan with dhcp or does that AP have a static IP?

Ven

[Alessio Andreoli]

Try to issue

show cdp nei detail

share this info and the trunk config (uplink)

Alessio

[Sivakanth Akkapu]

Hi All,

issue has been resolved

we forgot  the comman "default-gateway" in AP..now it's working

thank you all for quick response

[Ven Taylor]

It's always the little things...

[Naveen Kumar]

Hello,

FYI

Here is the installation and Troubleshooting guide for 1250 Series Autonomous Access Points:

http://www.cisco.com/en/US/docs/wireless/access_point/1250/installation/guide/125h_c3.html#wp1015872