03-24-2013 08:18 AM - edited 03-07-2019 12:27 PM
Hello Everyone,
I'm a newbie in Cisco world.
I have a task of setting up bandwidth limit on the 2811 router Fastethernet interfaces.
The scenario is:
We have a 4MB Internet connection and would like to allocate bandwidth usage to users.
Fastethernet 0/0 needs to be set with 256KB output and 2048 input. This is going to be connected to a wireless router.
Fastethernet 0/1 needs to be configured with 2048 output.
Please provide step by step configuration on how to achieve this.
I could also use SDM if that's easier than using CLI.
Waiting to hear from you all.
Thanks in advance.
03-24-2013 12:02 PM
Hi,
You can try something like this:
policy-map test class class-default fair-queue shape average 256000 ! interface fa0/0 service-policy output test
policy-map test1 class class-default fair-queue shape average 2000000 ! interface fa0/1 service-policy output test1
HTH
03-24-2013 08:44 PM
Reza,
Thanks for your response!
I have tried this in packet tracer and it worked fine. I will try this configuration and deploy it in production tomorrow and let you know the results of it.
However, I would like to know if this is the same way we set bandwidth limit coming from ISP through our router to the hosts in the network?
I've tried the following and I get a
CBWFQ : Can be enabled as an output feature only
Router(config)#policy-map test
Router(config-pmap)#class class-default
Router(config-pmap-c)#fair-queue
Router(config-pmap-c)#shape average 2000000
Router(config-pmap-c)#exit
Router(config-if)#service-policy input test
CBWFQ : Can be enabled as an output feature only
If I were to split the bandwidth on one interface to two groups:
Wireless users 256KB
Administration users 2048MB
How can this be acheived? Please provide step by step configuration and also some explanation will be very helpful.
Thanks a lot once again!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide