BGP Configuration Error on Cisco 3560x L3 Switch issue

[thurein min]

Hello Everyone ,

When I configured BGP for cisco WS-C3560X-48 L3 switch , I got some error.

Is it iOS version issue or ?

Please kindly advise me.

     L3_SW(config-if)#router bgp 7xxxx

     Protocol not in this image      <<<<<<<<<<<<<<<<<<<<<<<<

     L3_SW(config)#end

flash:/c3560e-universalk9-mz.122-53.SE2/c3560e-universalk9-mz.122-53.SE2.bin

cisco WS-C3560X-48 (PowerPC405) processor (revision A0) with 262144K bytes of memory.

Switch Ports Model              SW Version            SW Image               

------ ----- -----              ----------            ----------             

*    1 54    WS-C3560X-48       12.2(53)SE2           C3560E-UNIVERSALK9-M 

Thanks,

RM

[amabdelh]

I beleive you will need to use advance IP services image, this one that you are using doesn't support BGP

Sent from Cisco Technical Support iPhone App