cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1970
Views
0
Helpful
9
Replies

BPDU filter is enabled internally

paulstone80
Level 3
Level 3

Hello,

When I look at the output from 'show spanning-tree interface gi1/0/1 detail', I can see that the interface has 'BPDU filter enabled internally'.

There are no BPDU filter commands enabled on the switch, either globally or at an interface level, so I wondered what this message refers to?

Thanks,
Paul

HTH Paul ****Please rate useful posts****
1 Accepted Solution

Accepted Solutions