If it's an edge port, you often pair BPDUGuard with PortFast, but if you just want to filter BPDU transmissions, you can use BPDUFilter. I believe, the latter though, can set you up for a L2 loop, so it should be used with great care.
yes I agree with Joesph the latter I see it has disabling STP which isn't a good option unless you wish to do so!
res
paul
Please rate and mark as an accepted solution if you have found any of the information provided useful. This then could assist others on these forums to find a valuable answer and broadens the community’s global network.
