C3850-NM-2-10G

[swelsch]

Hello,

does the C3850-NM-2-10G Module really supports 2 10G Ports and 2 1G Ports at the same time as shown in this table ? I have the 24 Port Switch, so the NM-4-10G is no option.

thanks

[vivek srivastava]

As per Cisco documentation - YES.

Catalyst 3850 Switch Hardware Installation Guide

Network Modules

The description of the network module is incorrect. It should read:

C3850-NM-2-10G

Four-slot SFP module: Two slots (left side) support only 1-Gigabit SFP modules and two slots (right side) support either 1-Gigabit SFP or 10-Gigabit SFP modules. Supported combinations of SFP and SFP+ modules: Slots 1, 2, 3, and 4 populated with 1-Gigabit SFP modules. Slots 1 and 2 populated with 1-Gigabit SFP modules and Slot 3 and 4 populated with 10-Gigabit SFP+ module.

http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/release_notes/OL_30562_01.html

[amchang]

A post in this discussion has been reposted due to possible misconduct. Please refer to the CSC terms of use for more details.