cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
4885
Views
0
Helpful
4
Replies

C4500E-LB-IPB? What do I gain?

mile.ljepojevic
Level 1
Level 1

Hi,

I was just doing some configuration through dynamic configurator, and I found this part for 7E SUP.

I cannot find any compare of what do you have without and with license upgrade, so if someone can shed some light.

1 Accepted Solution

Accepted Solutions

You are correct we do support dual sup with LAN BASE but its only RPR MODE. IP BASE supports SSO mode.

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/12.2/01xo/configuration/guide/RPR.html

JayaKrishna

View solution in original post

4 Replies 4

Jayakrishna Mada
Cisco Employee
Cisco Employee

Hi Mile,

You will need IPBase if you are thinking about running dual sup7e in a chassis. Also it has some basic routing feature that lan-base does not have.

http://tools.cisco.com/squish/66065

JayaKrishna

Hi,

thanks for a reply.

I just ran through configurator, I can have redundant SUPs with LAN Base image. Are you sure that redundant SUPs need IPBase?

You are correct we do support dual sup with LAN BASE but its only RPR MODE. IP BASE supports SSO mode.

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst4500/12.2/01xo/configuration/guide/RPR.html

JayaKrishna

Thanks.

It was just what I needed.

Review Cisco Networking for a $25 gift card