cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
734
Views
0
Helpful
3
Replies

C4506e Netflow Configuration

scottsassin
Level 1
Level 1

I have a c4506e switch. The supervisor is  WS-X45-SUP6-E. It is running Version 15.1(1)SG1.

I would like to configure netflow on the VLAN interface, send it to our Orion NMS box, and I'm not sure how. 

2 Accepted Solutions

Accepted Solutions

Hello

Please review this 4500

Note:When the switch has redundant supervisor engines, both supervisor modules should have the
Netflow Services Card sub-module. 

res
Paul


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

View solution in original post

On the 7k you would have to enable the feature first.

feature netflow

Here is the config guide:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_15netflow.html

HTH

View solution in original post

3 Replies 3

Hello

Please review this 4500

Note:When the switch has redundant supervisor engines, both supervisor modules should have the
Netflow Services Card sub-module. 

res
Paul


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

This 4500 doesn't have the cards.

What do I need to configure netflow on my nexus 7000s? 

On the 7k you would have to enable the feature first.

feature netflow

Here is the config guide:

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_15netflow.html

HTH

Review Cisco Networking products for a $25 gift card