07-21-2016 11:09 AM - edited 03-08-2019 06:43 AM
I have a c4506e switch. The supervisor is WS-X45-SUP6-E. It is running Version 15.1(1)SG1.
I would like to configure netflow on the VLAN interface, send it to our Orion NMS box, and I'm not sure how.
Solved! Go to Solution.
07-22-2016 12:47 AM
Hello
Please review this 4500
Note:When the switch has redundant supervisor engines, both supervisor modules should have the
Netflow Services Card sub-module.
res
Paul
07-22-2016 09:53 AM
On the 7k you would have to enable the feature first.
feature netflow
Here is the config guide:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_15netflow.html
HTH
07-22-2016 12:47 AM
Hello
Please review this 4500
Note:When the switch has redundant supervisor engines, both supervisor modules should have the
Netflow Services Card sub-module.
res
Paul
07-22-2016 09:50 AM
This 4500 doesn't have the cards.
What do I need to configure netflow on my nexus 7000s?
07-22-2016 09:53 AM
On the 7k you would have to enable the feature first.
feature netflow
Here is the config guide:
http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/5_x/nx-os/system_management/configuration/guide/sm_nx_os_cg/sm_15netflow.html
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide