Hello, I have an issue with C6807 switch am trying to configure the VSS on 2 x C6807 switches to make them a single unit, however both switches are getting synched but in switch A module 4 is not working fine, I tried to insert and module many times but the same issue, switches are synched but module 4 on switch A is coming up with unknow or not applicable when I run the show module command.
is there any solution ?
LAN_CORE_SW#wr
Building configuration...
[OK]
Dec 4 09:47:57.031: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
LAN_CORE_SW#
Dec 4 09:47:57.367: %PFREDUN-SW1_STBY-4-BOOTSTRING_INVALID: The bootfile bootdisk:/s6t64-adventerprisek9_npe-mz.SPA.155-1.SY4.bin is present on the chassis active supervisor but not on the chassis standby
LAN_CORE_SW#
LAN_CORE_SW#
LAN_CORE_SW#
Dec 4 09:48:01.831: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:48:03.267: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:48:05.031: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:48:05.048: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:48:05.031: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:48:05.235: %PFREDUN-SW1_STBY-6-ACTIVE: Chassis Standby processor removed or reloaded
Dec 4 09:48:07.268: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
Dec 4 09:48:09.267: SW1_STBY: ha_ic_sync_config_fn: ERROR: Failed to sync startup-config to standby RP
Dec 4 09:48:09.267: SW1_STBY: ic_standby_outof_sync: ERROR: Active standby out of sync!
Dec 4 09:48:09.267: %RF-SW1_STBY-5-RF_RELOAD: Peer reload. Reason: Active Standby out of sync
Dec 4 09:48:09.632: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:48:09.467: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:48:11.324: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
LAN_CORE_SW#
Dec 4 09:50:08.058: %PFREDUN-SW1_STBY-4-BOOTSTRING_INVALID: The bootfile bootdisk:/s6t64-adventerprisek9_npe-mz.SPA.155-1.SY4.bin is present on the chassis active supervisor but not on the chassis standby
Dec 4 09:50:08.298: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
LAN_CORE_SW#
LAN_CORE_SW#
Dec 4 09:50:14.534: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:20.770: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:27.002: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:33.234: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:38.046: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:50:39.466: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:41.246: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:50:41.270: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:50:41.246: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:50:41.442: %PFREDUN-SW1_STBY-6-ACTIVE: Chassis Standby processor removed or reloaded
Dec 4 09:50:43.474: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
Dec 4 09:50:45.470: SW1_STBY: ha_ic_sync_config_fn: ERROR: Failed to sync startup-config to standby RP
Dec 4 09:50:45.470: SW1_STBY: ic_standby_outof_sync: ERROR: Active standby out of sync!
Dec 4 09:50:45.470: %RF-SW1_STBY-5-RF_RELOAD: Peer reload. Reason: Active Standby out of sync
Dec 4 09:50:45.802: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:50:45.670: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:50:47.530: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
LAN_CORE_SW#
LAN_CORE_SW#
Dec 4 09:50:14.534: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:20.770: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:27.002: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:33.234: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:38.046: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:50:39.466: SW1_STBY: ic_open_secondary_config_common: ERROR: In chassis secondary config IOCTL failed
Dec 4 09:50:41.246: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:50:41.270: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:50:41.246: %RF-SW1_STBY-3-NOTIF_TMO: Notification timer Expired for RF Client: Inter-Chassis Sync RF client(4023)
Dec 4 09:50:41.442: %PFREDUN-SW1_STBY-6-ACTIVE: Chassis Standby processor removed or reloaded
Dec 4 09:50:43.474: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
Dec 4 09:50:45.470: SW1_STBY: ha_ic_sync_config_fn: ERROR: Failed to sync startup-config to standby RP
Dec 4 09:50:45.470: SW1_STBY: ic_standby_outof_sync: ERROR: Active standby out of sync!
Dec 4 09:50:45.470: %RF-SW1_STBY-5-RF_RELOAD: Peer reload. Reason: Active Standby out of sync
Dec 4 09:50:45.802: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD removed
Dec 4 09:50:45.670: %C6KENV-SW1_STBY-4-LOWER_SLOT_EMPTY: The lower adjacent slot of module 3 might be empty. Airdam must be installed in that slot to be NEBS compliant
Dec 4 09:50:47.530: %OIR-SW2-6-INSREM: Switch 1 Physical Slot 4 - Module Type LINE_CARD inserted
