cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
551
Views
0
Helpful
1
Replies

C7200 IOS does not support CBWFQ

aparikh
Level 1
Level 1

I have a C7200 router which does not support full feature CBWFQ. There are no option to configure following commands:

class-map match-any voice

match protocol rtp

match ip dscp ef

System image file is "slot0:c7200-ds-mz.121-21.bin"

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.

Processor board ID 7627369

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

6 slot midplane, Version 1.3

X.25 software, Version 3.0.0.

4 Ethernet/IEEE 802.3 interface(s)

6 FastEthernet/IEEE 802.3 interface(s)

16 Serial network interface(s)

125K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

WHICH IOS WILL SUPPORT ALL CBWFQ Commands & above cards?

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

Looking at the feature navigator, there are several images that support CBWFQ.  Here is one:

c7200-adventerprisek9-mz.124-24.T7.bin

Also, here is the link:

http://www.cisco.com/cisco/software/release.html?mdfid=268437991&softwareid=280805680&release=15.1.3S2&os=

HTH

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card