C9300-NM-4G module

[erodriguez@iqteksolutions.com]

Hi,

Question regarding the C9300-NM-4G module, can I use this module on a C9200 switch? 

Regards

[marce1000]

 - No ,  FYI : https://www.router-switch.com/cisco-c9300-nm-4g-datasheet-pdf.html

 >...  Supported Devices   :          Cisco Catalyst 9300 Series

   M.

[erodriguez@iqteksolutions.com]

Correction the module is C9200-NM-4X.

[balaji.bandi]

C9200-NM-4X

yes that is compatable with Cat 9200

Look at the datasheet :

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-ser-data-sheet-cte-en.html

[erodriguez@iqteksolutions.com]

Sorry guys its that im getting the correction from the customer now, so what they have is C9200 switches, and they need the C9200-NM-4X module but the distributor only has the C9300-NM-4X, but with what merce1000 replied it does not.

Thanks

[balaji.bandi]

yes you confused post, so the answer is NO, it will not work, ask the customer to buy Cat 9300 for the module to work.

[Leo Laohoo · Accepted solution]

No, it will not fit.  The back pins were purposely designed to be different.