Re: c9300 switch ping command usage

jmcgrady1 · ‎06-28-2021

I have used the IOS ping command for years. Very useful. A question though - can it be configured to send one ping per second? I can specify how many pings to send and the timeout, but i cant see where to set a delay between each ping. It sends as fast as it can.

marce1000 · ‎06-28-2021

- Ref : https://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13730-ext-ping-trace.html

Perhaps delay can be influenced when using the Timeout option.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

jmcgrady1 · ‎06-28-2021

Unfortunately not. Timeout just affects how long to wait for a reply. It doesnt affect the rate at which pings are sent

marce1000 · ‎06-29-2021

- You are probably right, I was assuming that timeout might then affect the sending rate too.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

yboukredine · ‎05-16-2024

Hello,

Also from the web dashboard of the appliance via the left menu :

Troubleshooting > Ping and Trace Route

More confortable

--Yoann