C9300 UPOE +

[erodriguez@iqteksolutions.com]

Hi,

I have a question regarding UPOE+ and POE, POE+, if I have a C9300 with UPOE+ can are POE or POE+ devices supported?

Thanks

[Reza Sharifi]

Hi,

Yes, should work fine. UPOE is up to 60W and POE+ is up to 30W.

UPOE is backward compatible.

HTH

[erodriguez@iqteksolutions.com]

Is it the same for UPOE+ ?

Thanks

[Reza Sharifi · Accepted solution]

Yes, UPOE+ is up to 90W and that is also backward compatible.

HTH

[Flavio Miranda]

Yep...all of them supported

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html 

It all depends on the device through the CDP or LLDP negociation.

[erodriguez@iqteksolutions.com]

Thanks so Much!!