Sorry above is C9500-48Y4C-A using Cisco "SFP-10G-LR-S" singlemode fiber
Below is another stack using details C9500-24Y4C-A with SFP-10G-SR multimode fiber OM4. same IOS version 17.3.3
MY01-NSW10-B12L1-DIST#sh int Twe1/0/24 trans detail
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ----------------- ---------- --------- --------- ---------
Twe1/0/24 34.5 75.0 70.0 0.0 -5.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- ----------------- ---------- --------- --------- ---------
Twe1/0/24 3.34 3.63 3.46 3.13 2.97
High Alarm High Warn Low Warn Low Alarm
Current Threshold Threshold Threshold Threshold
Port Lane (milliamperes) (mA) (mA) (mA) (mA)
--------- ---- --------------- ---------- --------- --------- ---------
Twe1/0/24 N/A 6.7 10.0 8.5 3.0 2.6
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port Lane (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ---- --------------- ---------- --------- --------- ---------
Twe1/0/24 N/A -2.3 1.7 -1.3 -7.3 -11.3
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port Lane (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ---- --------------- ---------- --------- --------- ---------
Twe1/0/24 N/A -2.3 2.0 -1.0 -9.9 -13.9
MY01-NSW10-B12L1-DIST#sh int Twe2/0/24 trans detail
ITU Channel not available (Wavelength not available),
Transceiver is internally calibrated.
mA: milliamperes, dBm: decibels (milliwatts), NA or N/A: not applicable.
++ : high alarm, + : high warning, - : low warning, -- : low alarm.
A2D readouts (if they differ), are reported in parentheses.
The threshold values are calibrated.
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ----------------- ---------- --------- --------- ---------
Twe2/0/24 36.1 75.0 70.0 0.0 -5.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- ----------------- ---------- --------- --------- ---------
Twe2/0/24 3.34 3.63 3.46 3.13 2.97
High Alarm High Warn Low Warn Low Alarm
Current Threshold Threshold Threshold Threshold
Port Lane (milliamperes) (mA) (mA) (mA) (mA)
--------- ---- --------------- ---------- --------- --------- ---------
Twe2/0/24 N/A 6.4 10.0 8.5 3.0 2.6
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port Lane (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ---- --------------- ---------- --------- --------- ---------
Twe2/0/24 N/A -1.9 1.7 -1.3 -7.3 -11.3
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port Lane (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ---- --------------- ---------- --------- --------- ---------
Twe2/0/24 N/A -2.1 2.0 -1.0 -9.9 -13.9
NAME: "TwentyFiveGigE2/0/23", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR , VID: V03 , SN: JUS1737G29X
NAME: "TwentyFiveGigE2/0/24", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR , VID: V03 , SN: JUS1739G0EC
NAME: "TwentyFiveGigE1/0/23", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR , VID: V03 , SN: JUS1738G1FW
NAME: "TwentyFiveGigE1/0/24", DESCR: "SFP+ 10GBASE-SR"
PID: SFP-10G-SR , VID: V03 , SN: JUS1739G0DN
MY01-NSW10-B12L1-DIST#sh stackwise-virtual link
Stackwise Virtual Link(SVL) Information:
----------------------------------------
Flags:
------
Link Status
-----------
U-Up D-Down
Protocol Status
---------------
S-Suspended P-Pending E-Error T-Timeout R-Ready
-----------------------------------------------
Switch SVL Ports Link-Status Protocol-Status
------ --- ----- ----------- ---------------
1 1 TwentyFiveGigE1/0/23 U R
TwentyFiveGigE1/0/24 U R
2 1 TwentyFiveGigE2/0/23 U R
TwentyFiveGigE2/0/24 U R
MY01-NSW10-B12L1-DIST#sh stackwise-virtual bandwid
MY01-NSW10-B12L1-DIST#sh stackwise-virtual bandwidth
Switch Bandwidth
------ ---------
1 20G
2 20G
MY01-NSW10-B12L1-DIST#sh ver
Cisco IOS XE Software, Version 17.03.03
Cisco IOS Software [Amsterdam], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 17.3.3, RELEASE SOFTWARE (fc7)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2021 by Cisco Systems, Inc.
Compiled Thu 04-Mar-21 12:32 by mcpre
Cisco IOS-XE software, Copyright (c) 2005-2021 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 17.3.1r[FC2], RELEASE SOFTWARE (P)
MY01-NSW10-B12L1-DIST uptime is 51 minutes
Uptime for this control processor is 53 minutes
System returned to ROM by PowerOn at 11:34:50 MYT Tue May 11 2021
System restarted at 09:55:18 MYT Wed May 12 2021
System image file is "bootflash:packages.conf"
Last reload reason: PowerOn
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
Technology Package License Information:
------------------------------------------------------------------------------
Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------------------
network-advantage Smart License network-advantage
dna-advantage Subscription Smart License dna-advantage
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage
Smart Licensing Status: Registration Not Applicable/Not Applicable
cisco C9500-24Y4C (X86) processor with 2904385K/6147K bytes of memory.
Processor board ID FDO24410XMK
7 Virtual Ethernet interfaces
48 TwentyFive Gigabit Ethernet interfaces
8 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16002876K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
1638400K bytes of Crash Files at crashinfo:.
11161600K bytes of Bootflash at bootflash-2:.
1638400K bytes of Crash Files at crashinfo-2:.
Base Ethernet MAC Address : dc:77:4c:19:a5:00
Motherboard Assembly Number : 4874
Motherboard Serial Number : FDO24410XMK
Model Revision Number : V02
Motherboard Revision Number : 2
Model Number : C9500-24Y4C
System Serial Number : FDO24410XMK
Switch 02
---------
Base Ethernet MAC Address : dc:77:4c:19:a6:40
Motherboard Assembly Number : 4874
Motherboard Serial Number : FDO24410XLX
Model Revision Number : V02
Motherboard Revision Number : 2
Model Number : C9500-24Y4C
System Serial Number : FDO24410XLX
