C9500-32QC port assignments

[gp1200x]

I am really confused on the C9500-32QC.

Can I covert any pair of 40Gb ports to a single 100Gb or are there restrictions?

Example   ...document  says 32    of 40G ports or    16 or 100Gb ports....

then it also says you can have  24   40Gb ports and    4 100Gb ports.....????

Can I just convert two (any two) 40Gb ports into a 100 Gb port??

Example   ports 5 and 6  -   make a 100Gb port on 5 and 6 is disabled,    ports   13 and 14 - make a 100Gb port on 13 and 14 is disabled.

Why is this so difficult for them to explain in English.

[Reza Sharifi · Accepted solution]

Have look at this document. There is an example:

Configuring 40G and 100G on C9500-32QC: Example

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-8/configuration_guide/int_and_hw/b_168_int_and_hw_9500_cg/b_168_int_and_hw_9500_cg_chapter_00.html#reference_y2g_svf_5gb

HTH