02-20-2012 06:00 AM - edited 03-07-2019 05:02 AM
Hi,
I have a few 3560E running Ver 12.2(50)se2. Can anyone tell me if these boxes can be configured to run VRF. I see a "sho IP VRF" option, but I do not see it available when under config t. Do I need to do a IOS upgrade to be able to configure VRF?
Thanks in advance.
Solved! Go to Solution.
02-20-2012 09:47 AM
Hello Tracey,
Your switch is currently running IP Base license. You will need to purchase and install the IP Services license in order to unlock the VRF capability (along with many others).
Regarding the management of licenses, this is a lengthy but a very descriptive guide:
Best regards,
Peter
02-20-2012 09:07 AM
Hi Tracey,
What feature set/license are you running? Multiple VRFs are supported on your platform with the IP SERVICES license or feature set.
Best regards,
Peter
02-20-2012 09:18 AM
Pter,
Thanks for the reply. Good question, I don't know. How do I determine this?
02-20-2012 09:22 AM
Hi Tracey,
Try show version and show license all commands.
Best regards,
Peter
02-20-2012 09:37 AM
Show version states:
License LEvel:ipbase
License Type: permanent
Next release license level: ipbase
Sh license all:
license store: primary license storage
store index: 0
Feature: ipbase
license type: permanent
license state: active in use
license priority: medium
license count: non-counted
license store: evaluation license storage
store index: 0
feature: ipservices
license type: Evaluation
license state: active, not in use, EULA not accepted
evaluation total period: 8wks 4 days
evaluation total period: 8wks 4 days
license priority: none
license counted: non-counted
please let me know if there is anything else that you need.....
02-20-2012 09:47 AM
Hello Tracey,
Your switch is currently running IP Base license. You will need to purchase and install the IP Services license in order to unlock the VRF capability (along with many others).
Regarding the management of licenses, this is a lengthy but a very descriptive guide:
Best regards,
Peter
02-20-2012 10:03 AM
Peter,
Thank you very much for this interaction! You have been very helpful!
02-20-2012 10:16 AM
Hello Tracey,
It has been a pleasure. Thank you for your rating and please feel welcome to continue participating here on CSC!
Best regards,
Peter
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide