12-27-2006 06:10 PM - edited 03-05-2019 01:30 PM
Is this the correct CLI to manage Vty lines.
I got error when I issued no line vty 0 3
Enter configuration commands, one per line. End with CNTL/Z.
sing85-1sw4(config)#no line vty 0 3
% Can't delete last 16 VTY lines
sing85-1sw4(config)#
System image file is "flash:c3560-ipbase-mz.122-25.SEB4.bin"
cisco WS-C3560-24PS (PowerPC405) processor (revision F0) with 118784K/12280K bytes of memory.
12-27-2006 08:02 PM
Depending on your IOS version, you cannot remove the default 5 or 16 VTY lines - in your case 16. While you cannot remove these lines, you can make them inoperable by entering the following.
line vty 0 3
no exec
Hope this helps. If so, please rate the post.
Brandon
12-28-2006 04:40 PM
At the moment, I put these lines inoperable mode.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide