11-14-2020 04:56 AM
Hi all
May I have a question
Our network have more than 20 vlan
Core switch use Rapid-PVST
Access switch user RSTP
Are they can work together ?
thank for advance.
Solved! Go to Solution.
11-14-2020 06:19 AM
yes, they can exist in the network, you need to look at the model of the switch and IOS have any limitations.
but when Rapid-PVST able to meet the requirement, what is use case to have RSTP (bit old and legacy still required to 30-50 seconds to converge)
you can also look MST if you like, but Rapid is quicker in terms of STP timers and convergence.
11-14-2020 06:19 AM
yes, they can exist in the network, you need to look at the model of the switch and IOS have any limitations.
but when Rapid-PVST able to meet the requirement, what is use case to have RSTP (bit old and legacy still required to 30-50 seconds to converge)
you can also look MST if you like, but Rapid is quicker in terms of STP timers and convergence.
11-14-2020 09:54 AM
That's an "it depends" answer.
I believe it's possible in some cases; don't recall all the specifics.
Probably most likely is if the non rapid-PVST equipment only hosting one VLAN, if it's hosting multiple VLANs, wouldn't expect you to be able to use different links per VLAN (for load sharing purposes) on the non-Cisco equipment.
You could also consider shifting to MST.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide