Hey guys, so i have HSRP configured on two routers and its working just fine, the thing is the two routers are connected to a switch and i have two pcs connected (Pcs running PBX) to the switch. I want to configure NAT portforwarding so that when the softphones that are on the other end of the network try and register to a PBX it uses the Virtual HSRP address, and then NAT sees the address being called s it then forwards it to a specific IP adddress? Is that even possible?
From the diagram it's not clear why do you need NAT into HSRP address!
If you use static NAT no both of the devices into single IP-address (not equal to HSRP or any real IP-address assigned); this would work... at the same time each HSRP switchover would result in session loss.
To participate in this event, please use the button to ask your questions
* Note: The link to join the discussion will be activated on March 8
All the knowledge of these four experts at your disposal!
Cisco Software-Defined Wide Area Network (SD-WAN...
Community Live- ISR1100X-4G and ISR1100X-6G Platform Overview and Architecture
(Live event - Tuesday, 23 March, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event will have place on Tuesday 23rd, March 2021 at 10:00 hrs PDT&...
Cisco Secure Network Access is helping IT to bridge the gap between what is essential to the business and what the network delivers and to build the next-generation campus network for an unplugged and uninterrupted experience.
Learn more about how these w...
(view in My Videos)
Community Live- New Additions to the Catalyst 8000 Family
(Live event - Tuesday, 23 February, 2021 at 10:00 am Pacific/ 1:00 pm Eastern / 7:00 pm Paris)-
This event had place on Tuesday 23rd, February 2021 at 10:00 hrs PDT...
This event had place on Tuesday 23rd, February 2021 at 10hrs PDT
Designed for an intent-based network, the Cisco Catalyst 8000 Edge Platforms family offers best-in-class networking and security combined. The platforms, available in b...