07-24-2019 10:14 AM
1.Can we stack 2*ws-c3850-24T-E withws-c3850-12s-e?
2.is it rule that in stack,we have switches in even number?
3.Can ws-c3850-12s-e take copper based SFP at its 12 port ?
4.when we buy ws-c3850-12s-e then do we get SFP with that 12 port or we have to order separately
07-24-2019 10:41 AM
Stacks can be 2, 3, 4, 5 or any combination up to 9 I believe. You can stack varying models of c3850, as long as they are on the same code and running mode.
07-24-2019 10:42 AM
1.Can we stack 2*ws-c3850-24T-E withws-c3850-12s-e? Yes. see link below
StackWise-480 supports a mixed stack of any Catalyst 3850 models (48 ports 10/100/1000, 24 ports 10/100/1000, and 12/24 Ethernet SFP ports; see Figure 1). You can mix the switches with different number of access ports (48, 24, and 12), different type of access ports (copper and fiber, PoE, and non-PoE-capable), and different network modules. But all switches in one stack must have the same version of IOS XE and the same feature set license. A mixed stack of LAN base switches with IP base or IP services is not supported. Catalyst 3850 Series Switches with a LAN base feature set can only stack with other Catalyst 3850 Series LAN base switches. The same applies to IP base and IP services as well.
2.is it rule that in stack,we have switches in even number?
No, it can be odd or even numbers.
3.Can ws-c3850-12s-e take copper based SFP at its 12 port ?
Yes
4.when we buy ws-c3850-12s-e then do we get SFP with that 12 port or we have to order separately
Yes, SFPs need to be ordered separately.
HTH
07-24-2019 10:57 AM
Regarding question 3, GLC_T is supported but I don't see copper SFP in the list
https://tmgmatrix.cisco.com/?dr=8&npid=387
HTH
07-24-2019 11:36 AM
do GLC-T SFP supports 1000base T COPPER PORT?
07-24-2019 12:08 PM - edited 07-24-2019 12:09 PM
Correct. GLC-T support a Gig copper interface.
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide