Hi!
I have a branch new Cisco ASR 1002-X
but in the first time power on, it showed an error as below and then stopped booting
so how can I do now?
thanks!
Located Software/asr1002x-universalk9.03.16.02.S.155-3.S2-ext.SPA.bin, start cluster is 220524
Image loaded
Boot image size = 463460384 (0x1b9fd820) bytes
ROM:RSA Self Test Passed
ROM:Sha512 Self Test Passed
Package header rev 1 structure detected
Calculating SHA-1 hash...done
validate_package_cs: SHA-1 hash:
calculated 10a2ba97:133dd3e1:c5b08b0a:aa71af44:2cfcc7f6
expected 10a2ba97:133dd3e1:c5b08b0a:aa71af44:2cfcc7f6
Signed Header Version Based Image Detected
Using FLASH based Keys of type = PRIMARY KEY STORAGE
Using FLASH based Keys of type = ROLLOVER KEY STORAGE
RSA Signed RELEASE Image Signature Verification Successful.
Image validated
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 1 contained errors which were auto-corrected.
%IOSXEBOOT-4-FILESYS_ERRORS_CORRECTED: (rp/0): bootflash 5 contained errors which were auto-corrected.
