03-02-2021 11:49 AM
Hi,
When I try to create a user under the General Settings - User Administration section in the web UI I get a 'Configuration failed to apply, Invalid input Detected'. I have put in many different combinations of username/passwords and nothing works.
Has anyone else come across this issue?
Solved! Go to Solution.
03-03-2021 05:48 AM
I solved this by added adding username myusername privilege 15 password 0 mypassword to flash:dc_profile_dir/day0.cfg, I then ran the setup command from the console.
I wish cisco would add the full CLI capabilities to these switches.
03-02-2021 04:51 PM
I am thinking you may have the same issue based on the information, if you have console access - check what is the Logs you see on the switch?
Look at this thread :
https://community.cisco.com/t5/switching/2960l-sm-issue-to-access-wgui/m-p/4127773
03-03-2021 05:48 AM
I solved this by added adding username myusername privilege 15 password 0 mypassword to flash:dc_profile_dir/day0.cfg, I then ran the setup command from the console.
I wish cisco would add the full CLI capabilities to these switches.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide