Hi ,
yesterday I've added my core switch (WS-C4507R+E) to our Cisco Prime infrastructure server to perform some tests. This morning I've noticed that many vty sessions have been opened by the Prime server and I was trying to close them but I'm not able to close them.
SW-CORE-1#who
Line User Host(s) Idle Location
* 1 vty 0 user1 idle 00:00:00 10.159.240.24
2 vty 1 user1 idle 18:22:52 10.162.2.13
3 vty 2 user1 idle 18:20:51 10.162.2.13
4 vty 3 user1 idle 18:18:50 10.162.2.13
5 vty 4 user1 idle 18:16:49 10.162.2.13
6 vty 5 user1 idle 18:14:03 10.162.2.13
7 vty 6 user1 idle 18:12:03 10.162.2.13
8 vty 7 user1 idle 17:56:33 10.162.2.13
9 vty 8 user1 idle 18:08:15 10.162.2.13
10 vty 9 user1 idle 17:54:32 10.162.2.13
11 vty 10 user1 idle 17:52:31 10.162.2.13
12 vty 11 user1 idle 17:50:31 10.162.2.13
13 vty 12 user1 idle 17:47:45 10.162.2.13
14 vty 13 user1 idle 17:45:44 10.162.2.13
Interface User Mode Idle Peer Address
SWPIL138P4#clear line vty 1
[confirm]
[OK]
SW-CORE-1#who
Line User Host(s) Idle Location
* 1 vty 0 user1 idle 00:00:00 10.159.240.24
2 vty 1 user1 idle 18:24:07 10.162.2.13
3 vty 2 user1 idle 18:22:06 10.162.2.13
4 vty 3 user1 idle 18:20:05 10.162.2.13
5 vty 4 user1 idle 18:18:04 10.162.2.13
6 vty 5 user1 idle 18:15:19 10.162.2.13
7 vty 6 user1 idle 18:13:18 10.162.2.13
8 vty 7 user1 idle 17:57:48 10.162.2.13
9 vty 8 user1 idle 18:09:31 10.162.2.13
10 vty 9 user1 idle 17:55:47 10.162.2.13
11 vty 10 user1 idle 17:53:47 10.162.2.13
12 vty 11 user1 idle 17:51:46 10.162.2.13
13 vty 12 user1 idle 17:49:00 10.162.2.13
14 vty 13 user1 idle 17:46:59 10.162.2.13
Interface User Mode Idle Peer Address
I cleared the respective TCP Session using the command : clear tcp tcb XXXXXX but I can't kill the vty session.
I've also removed the switch form the Cisco Prime device inventory.
The switch is a Catalyst C4507R+E with the following IOS-XE cat4500e-universalk9.SPA.03.05.01.E.152-1.E1.bin
Do you have any ideas? A bug software?
thanks
F.Coppotelli
