cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
546
Views
15
Helpful
5
Replies

Cannot ping ASAv ouside

I have two ouside nodes. VPC2 and R6.

I can ping from VPC1 to VPC2 and Can not ping from VPC1 to R6.

Please help me.

R4 - L2 IOU 15.2d

ASAv - ASAv-971

R6 - L3 IOU 155-2.T ! !

 

https://drive.google.com/open?id=1jvHXyq5dmaUMJ__8jwpxYNmrlwUPjG55

2 Accepted Solutions

Accepted Solutions

Alex Pfeil
Level 7
Level 7
I was able to see the docs by opening them in anew window.

R6 does not have a route to the inside through the firewall.

Please rate helpful posts.

View solution in original post

On R6, add the default route below:

 

ip route 0.0.0.0 0.0.0.0 203.0.113.2

View solution in original post

5 Replies 5

Alex Pfeil
Level 7
Level 7
I can’t see the two text files. Please attach them to the post. It will most likely be a routing or an ACL.

Please rate helpful posts.

Alex Pfeil
Level 7
Level 7
I was able to see the docs by opening them in anew window.

R6 does not have a route to the inside through the firewall.

Please rate helpful posts.

On R6, add the default route below:

 

ip route 0.0.0.0 0.0.0.0 203.0.113.2

Thanks for the reply.
Adding a default route helped me

I did not recommend the default route because the router is on the outside ASA interface.
Review Cisco Networking for a $25 gift card