Hi, I have a cisco 3825 router with two GE interfaces. GE0/0 is connected to a switch through ethernet cable. I have configured the GE0/0 interface with IP address. I have also configured static route for the local network. However, now I can only ping the GE0/0's own IP from the router. Here are the running-config:
hostname Router
!
boot-start-marker
boot-end-marker
!
!card type command needed for slot 2
enable secret 5 $1$4gxa$sykc0mcaxpCIrGc86i1ZE.
enable password 7 012156114F5814
!
no aaa new-model
ip cef
!
!
!
!
!
!
!
username routeradmin password 7 113B4910034119
!
!
!
!
interface GigabitEthernet0/0
description Internal
ip address 10.1.52.4 255.255.255.0 secondary
ip address 10.1.52.5 255.255.255.0
ip nat inside
duplex auto
speed auto
media-type rj45
no cdp enable
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
media-type rj45
!
no ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.1.52.1
ip route 10.1.52.0 255.255.255.0 10.1.52.1
!
no ip http server
no ip http secure-server
!
!
control-plane
!
!
line con 0
password 7 012156114F5814
login
line aux 0
password 7 1425421E185738
login
line vty 0 4
password 7 133747071F5F16
login local
!
scheduler allocate 20000 1000
!
end
The 10.1.52.1 is the current gateway on the 10.1.52.x LAN.
Can anyone please help here?
Thanks a lot!
