Cannot upgrade servicemodule in Catalyst 3750X

[cisco]

Hi,

I have upgraded my Catalyst 3750X-switches to software-version 15.0(2)SE2, but I cannot upgrade the 10G servicemodule to the same version. I use the archive download-sw command to load the c3kx-sm10g-tar.150-2.SE2.tar. The file is loaded to the switch, but when the process starts to transfer the file to the module it fails with the following messages:

• Error 2: Unable to transfer image to FRU Modul on switch 1
  
• Error: Failed to update FRU Module image
  

Any tips of what the problem could be?

The modules is now running with in-compatible versions as shown below:

Switch# H/W Status (CPU/FPGA) CPU Link Version

-----------------------------------------------------------------

1 OK 77C/71C ver-mismatch 03.00.41

2 OK 73C/73C ver-mismatch 03.00.41

[Reza Sharifi]

Hi,

Here is the instruction on how to load it:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750x_3560x/software/release/15.0_1_se/release/notes/OL25302.html#wp1048167

HTH