cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
1
Replies

Cat 9300 power budget issues

Nilay Patel
Level 1
Level 1

We have C9300-48UXM with power supply C1-1100W

Recently, started using these switch model. One stack we built with adding both PS connected to source and Another connected with one. Later on we added 2nd sources on PS. PS was connected to switch. We are seeing available power is very less on switch-stack where we added 2nd source

1st switch-stack - no issue (power inline budge ~1600)

NilayPatel_0-1669983487026.jpeg

2nd switch-stack - power issue. Budge only 525W for power inline

NilayPatel_1-1669983487026.jpeg

1 Accepted Solution

Accepted Solutions

Nilay Patel
Level 1
Level 1

Got advice from mgmt, unplug all power supplies & power cables & plug it back. That fix the PoE availability. Now I can see total availability PoE  1625/switch

View solution in original post

1 Reply 1

Nilay Patel
Level 1
Level 1

Got advice from mgmt, unplug all power supplies & power cables & plug it back. That fix the PoE availability. Now I can see total availability PoE  1625/switch

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: