06-19-2007 08:11 AM - edited 03-05-2019 04:49 PM
Hi folks,
I can't seem to locate a 10/100/100 POE (pre-standard or standard) 48 port blade that takes advantage of the technologies beyond the shared 32GB bus. I see CEF enabled, but I need to scale to dCEF, which doesn't seem to be available. Are there any blades that support dCEF or will support dCEF?
Please Advise
06-19-2007 11:40 AM
Hi Dennis
The WS-X6548-GE-45AF module is a 10/100/1000 PoE fabric-enabled CEF 256 module which means it has connection to the 32Gbps shared bus but also an 8Gbps dedicated connection to the switch fabric.
So you can utilise the 8Gbps connection with either a Sup720 or a Sup2 with an SFM (Switch Fabric Module).
You can't though use DFC's ( Distributed forwarding cards) on these modules.
HTH
Jon
06-19-2007 12:10 PM
The 6748-GE-TX module should work fine w/dCEF as long as you purchase the additional 6700-dfc3 daughter card. Also, this configuration will only work w/Sup720.
06-19-2007 12:18 PM
Hi
I think the original poster was after a PoE module and the WS-X6748-GE-TX does not have PoE support.
Jon
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide