cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

513
Views
5
Helpful
2
Replies
Highlighted

Cat6506-E Tracebacks and Syslog Messages

Hi,

Customer use Cat6506-E with VS-SUP2T-10G and IOS Release 15.1(2)SY3, Image is IPService.

Now we get following Syslogs back:

Dec 20 03:42:28.539 MET: EU_LIFSTAT: lifstat_read_counter(): Parity error detected in EARL 0 at idx 0x46D7 high [0x0] mid [0x8000] low [0x0]

Dec 20 03:42:28.539 MET: -Traceback= 76879D4z 76D6880z 76D91E8z 76D9340z 76DB1D4z 76DBC04z 6DF38B4z 6DECE98z

Feedback will be appreciate.

Thanks

Regards

Hansruedi

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Participant

You are using Multicast?  You

You are using Multicast?  You are getting these alerts continuously?

 

For Trackbacks, usually Cisco has a tool to decode and check if you are encountering certain bug.

View solution in original post

2 REPLIES 2
Highlighted
Participant

You are using Multicast?  You

You are using Multicast?  You are getting these alerts continuously?

 

For Trackbacks, usually Cisco has a tool to decode and check if you are encountering certain bug.

View solution in original post

Highlighted
Cisco Employee

This indicates Parity error

This indicates Parity error.

Did the module reload?

->if the traceback is not repeated you can safely ignore it.It could be soft parity error ie. transient or one time occurrence.

Regards,

Naveen

***rate if it is helpful***

CreatePlease to create content
Content for Community-Ad