Catalist 6509 sup-S720 not support WS-X6248A-RJ-45

[ShepelevDmitry]

I have a 6509-E, i recently bought Supervisor Engine 720 10GE (Active)    VS-S720-10G  and 48-port 10/100 RJ45 EtherModule   WS-X6248A-RJ-45. Once i fired it all up i got this error %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 3, power not allowed: Unknown Card Type.. the System image file is "bootdisk:s72033-adventerprisek9_wan-vz.122-33.SXI6.bin"

[Aaron O'Hare]

If its a WS-X6148A-RJ-45 it should be supported in 122-18 and forware (http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/69583-ptn.html#topic2)

It is possible you have a defective card or backplane slot or a non-genuine card.

Can you provide a show module 4 and a diagnostic start module 4 test non-disruptive 

-AO

[Jon Marshall]

Aaron

I answered in a duplicate post but according to the release notes any version after 12.2SXF does not support that module.

Jon