Catalyst 1300 cross stack etherchannel LACP

[Jauffrey]

Hello, I would like to know if catalyst 1300 series support cross stack LACP,

regards.

[Leo Laohoo]

According to the Catalyst SMB 1300 Data Sheet: 

Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)

---

It is very important to check the configuration guide (if you can find it!) before making any decision.

[Kasun Bandara]

@Jauffrey hi, can you explain the requirement. these switches are support LACP. what you mean by cross stack? if you build stack using 2 or more switches (same stack) you can create LACP using any member in the single stack. 

[Jauffrey]

Hello, I meant using 2 ports from 2 different switches in the same stack to make a LAG, this is not possible on this switch according to the answer I received on a cisco youtube video comment.

[Joseph W. Doherty]

It appears the answer should be yes.

From https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-1300-series-switches/nb-06-cat1300-ser-data-sheet-cte-en.html

[fabioaquino13255]

Hello Jauffrey!
The answer is: Yes. Up to 8 switches in stack.