08-21-2012 07:07 PM - edited 03-07-2019 08:28 AM
i try to implement layer 2 qos in 2960. when i complete to configure the switch, i want to test the qos.PC1 conect to switch port 1,PC2 conect to switch port 2 . PC1 is source teminal. i use skydata.exe and FTP for the test.
when use the skydata ,the PC2 speed can reach 10mbps.
when use the FTP , the PC2 only can reach 1.2mbps. why???
the configuration :
mls qos
!
!
class-map match-all qos10
match ip dscp default
class-map match-all qos20
match ip dscp default
!
!
policy-map qos10
class qos10
police 10000000 64000 exceed-action drop
policy-map qos20
class qos20
police 20000000 64000 exceed-action drop
!
!
!
interface FastEthernet0/1
switchport mode access
service-policy input qos10
!
interface FastEthernet0/2
switchport mode access
service-policy input qos20
!
08-21-2012 09:33 PM
Hello Yuliang,
For the Skydate application:30 mbps will be the maximum so
30000000 bps
class-map Skydate
match access-group Skydate
policy-map Skydate
class Skydate
police 30000000 64000 exceed-action drop
class-map FTP
match access-group FTP
policy-map FTP
class FTP
police 1200000 64000 exceed-action drop
interface FastEthernet0/1
switchport mode access
service-policy input Skydate
!
interface FastEthernet0/2
switchport mode access
service-policy input FTP
Rate all the helpful posts
Julio
08-21-2012 10:42 PM
thanks for your reply ...
sorry ,,,, the my make a mistake ...not "skydate" ,,is "skydata"
skydata is a qos test software..
08-21-2012 11:02 PM
Hello,
That explains why I did not find anything related to that on the web
My pleasure to help
Rate all the helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide