cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1100
Views
15
Helpful
5
Replies

Catalyst 2960L-8PS - Switch Fails to Verify MCU Firmware

Mike-
Level 1
Level 1

Hi, I restarted Catalyst 2960L-8PS switch today, but the switch never came back up. I consoled in and found that the switch was constantly restarting. The error messages are:

 

1.) Verifying MCU firmware... Fail

2.) MCU firmware Upgrade Fail - failed to get MCU data

3.) Invalid parameter block. Using Mac address of 0:0:0:0:0:0

4.) POST: ACT2 Authentication: End, Status Failed driver class subsystem initialization failed.

5.) Cloud not get Msemi to gracefully enter recovery state.

6.) nand bad command - shows bad blocks

 

Here are the screenshots

MCU-firmware-verifying-FAIL.pngnot_get_Msemi-Invalid_parameter_block.pngnand_bad.png

 

Is there a way to recover the switch?

 

1 Accepted Solution

Accepted Solutions

 

          - The device has a fatal hardware problem and needs to be RMA-ed

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

View solution in original post

5 Replies 5

marce1000
VIP
VIP

 

                    - Which options are available under that nand command = nand ?

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Only nand bad shows as available command.

 

nand ?

nand bad

 

nand ?nand ?

 

     - Try fsck flash:

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !

Received unknown command

"Unknown cmd: fsck"

 

Switch is in a limited ROMMON.

switch: ?switch: ?

 

          - The device has a fatal hardware problem and needs to be RMA-ed

 M.



-- ' 'Good body every evening' ' this sentence was once spotted on a logo at the entrance of a Weight Watchers Club !
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: