Catalyst 3650 Switch

[abhishek-nath]

We are using Catalyst 3650 Switch for our internal testing and we wanted to know which PHY model is used in the Switch design for further analysis

[M02@rt37]

Hello @abhishek-nath 

do that command:

show controllers ethernet-controller gigabitethernetX/X/X phy detail

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/3se/consolidated_guide/command_reference/b_consolidated_3650_3se_cr/b_consolidated_3650_3se_cr_chapter_011.html

and check PHY IDs like this:

In my case if I combine the 2 PHY ID I have in Hex 0x002063B0 => It is what we call the PHY Identifier Register (PHYIDR1/PHYIDR2 combined).

After, that I need to check that PHY ID regarding constructors PHY ID database ...

[abhishek-nath]

Thanks for the response !

I guess i haven't made myself clear enough, i apologize. I am basically looking for PHY Model/Manufacturer Part Number details used on the Ethernet ports for the Hardware design analysis. If anyone can share that details, it will be really helpful.

[Mark Elsen · Accepted solution]

  - @abhishek-nath           Cisco does not provide those info's

  M.

[M02@rt37]

Mmmm OK. 

So, Mr Elsen answers to you.