09-12-2023 12:32 AM
Hello
When I turn on device, it goes directly to rommon mode!
It came with various error: magic number or bootflash directory (mostly). Here are some information:
Supervisor version:
WS-X4612-SFP-E, WS-X45-SUP8-E
Rommon version: 15.1(1r)SG5
Ios Version: Cat4500es-universalk9.SPA.03.11.152-7.E2.bin
And:
Switch#show boot
BOOT variable = bootflash:bootflash:cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin,12;cat4500e-universalk9.SPA.03.10.02.E.152-6.E2.bin,1;cat4500e-universalk9.SPA.03.10.02.E.152-6.E2.bin,1;cat4500e-universalk9.SPA.03.10.02.E.152-6.E2.bin,1;cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin,1;cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin,1;cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin,1;tftp:cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin 255.255.255.255,12;
CONFIG_FILE variable = bootflash:bootflash:cat4500es8-universalk9.SPA.03.11.02.E.152-7.E2.bin,12
BOOTLDR variable does not exist
Configuration register is 0x2102
Standby not ready to show bootvar
#################################################################################################
Switch#dir
Directory of bootflash:/
40565 drwx 4096 Dec 25 2017 09:37:18 +00:00 virtual-instance
89233 drwx 4096 Dec 25 2017 09:37:18 +00:00 virtual-instance-stby-sync
40563 drwx 4096 Sep 12 2023 07:50:16 +00:00 pxe
40564 -rw- 2206 Jan 13 2017 01:23:24 +00:00 FXS1947Q21W_20170113001021843.lic
40568 drwx 4096 Mar 22 2023 16:15:54 +00:00 scripts
40570 -rw- 2944092 May 3 2023 11:41:30 +00:00 cat4500-e-ios-promupgrade-150-1r-SG14
#################################################################################################
Switch#show module
Chassis Type : WS-C4507R+E
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model Serial No.
---+-----+--------------------------------------+------------------+-----------
2 12 1000BaseX (SFP) WS-X4612-SFP-E JAE19370A8F
3 8 Sup 8-E 10GE (SFP+), 1000BaseX (SFP) WS-X45-SUP8-E CAT2002L3YS
M MAC addresses Hw Fw Sw Status
--+--------------------------------+---+------------+----------------+---------
2 5c83.8f55.29b2 to 5c83.8f55.29bd 2.0 Ok
3 58ac.78d9.6480 to 58ac.78d9.6487 1.3 15.1(1r)SG5 03.11.02.E Ok
Mod Redundancy role Operating mode Redundancy status
----+-------------------+-------------------+----------------------------------
3 Active Supervisor SSO Active
System Failures:
----------------
Power Supply: bad/off (see 'show power')
#################################################################################################
Switch#show bootflash:
-#- --length-- ---------date/time--------- path
1 4096 Dec 25 2017 09:37:18.0000000000 +00:00 virtual-instance
2 4096 Dec 25 2017 09:37:18.0000000000 +00:00 vman_fdb
3 4096 Dec 25 2017 09:37:18.0000000000 +00:00 virtual-instance-stby-sync
4 4096 Dec 25 2017 09:37:18.0000000000 +00:00 virtual-instance-stby-sync/guestshell+
5 4096 Sep 12 2023 07:50:16.0000000000 +00:00 pxe
6 4096 Sep 12 2023 07:50:16.0000000000 +00:00 pxe/scripts
7 4096 Sep 12 2023 07:50:16.0000000000 +00:00 pxe/ova
8 2206 Jan 13 2017 01:23:24.0000000000 +00:00 FXS1947Q21W_20170113001021843.lic
9 4096 Mar 22 2023 16:15:54.0000000000 +00:00 scripts
10 2944092 May 03 2023 11:41:30.0000000000 +00:00 cat4500-e-ios-promupgrade-150-1r-SG14
1608179712 bytes available (5611520 bytes used)
Any Ideas?
Best Regards
Solved! Go to Solution.
09-26-2023 02:36 AM
After reseting :
Resetting .......
Verifying FPGA (P) Signature ....................... PASSED
Verifying ROMMON (P) Signature ......... PASSED
************************************************************
* *
* Rom Monitor *
* Copyright (c) 2012-2014 by Cisco Systems, Inc. *
* All rights reserved. *
* *
************************************************************
Rom Monitor (P) Version 15.1(1r)SG5
Compiled Thu 06-Nov-14 22:58 [RLS]
System : WS-X45-SUP8-E Slot [3]
Chassis : WS-C4507R*E Mod [2]
Revision : CPU 2.1 BOARD 4.0 FPGA 3.2978.834F
Memory : 4096 MB
Date : Tue Sep 26 10:59:00 2023
***** The system will autoboot in 5 seconds *****
Type Control-C to prevent autobooting....
. . . . .
config-register = 0x2101
Autobooting using the first file from bootflash.....
No bootable image found !
boot: can not determine first file name on device "flash1:/USER"
Autoboot using first file from bootflash failed.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide