05-14-2020 08:28 AM
Hello!
Does anyone have table with explanation of ethernet ports led colorors and state codes for catalyst 9500-40X?
I have installation with two Catalyst 9500-40X and most of active ports blinking green, but several of active ports blinking green and sometimes amber. I can`t find what does it means.
Thanks in advance!
05-14-2020 08:35 AM - edited 05-14-2020 08:36 AM
Have you seen the Hardware installation guide?
System LED (Table 10) refers to the LED color.
05-14-2020 09:17 AM
Hi!
Of cource i saw installation guide, but it doesn`t contains information about ethernet ports LED.
Table 10 contain information about system LED, not about port LED.
05-14-2020 09:27 AM
Hi,
Are the interfaces clean?
Also, have a look at this document. It is for the 3750 series but it could apply to the 9500 as well.
HTH
05-14-2020 10:27 AM
Sorry, but no. It couldn`t apply.
9500-40x have SFP+ ports, not copper. There is no PoE.
And in our project thats switches are the core. All ports to access switch bundled by etherchannel and they are root in STP. All pord are in Desg state.
In Etherchannel all ports are in P state.
"Show int transceiver" also show, thats all rx optical powes are in thresholds limits.
Perhaps, i should take a look at 4500X, or 3850X switches whith SFP ports installation guide. But I would still like to see information about 9500.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide