Catalyst 9500 Event manager not possible anymore on Fuji 16.9.3

[arno.streuli]

Hello,

As anyone able to use event manager script on a Catalyst 9500 with Fuji 16.9.3 ?

I was able to use it on the 16.9.1, but this command does show anymore n the latest one.

I'm still in l level license and network-advantage, but that should be an issue

[Mark Malone]

HI
The config guide is for the 16.9.x releases though not just like 9.3 and 9.1 so its strange its been removed if it was fully available in 16.9.1 , i see the config guides speaking about it being available but im struggling to see anything else ,is it giving you any EEM options ?

This test periodically monitors data-path traffic in transmitted direction of each network port that are physically connected to a device with the status as UP, and completes within a millisecond per port. This test also monitors the transmit counters at ASIC level to verify that the ports are not stuck. The test displays syslog messages and users can take corrective actions using the IOS Embedded Event Manager (EEM)

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9500/software/release/16-9/configuration_guide/sys_mgmt/b_169_sys_mgmt_9500_cg/configuring_online_diagnostics.html?bookSearch=true

[Mark Malone]

i see it under DNA licenses for 9500s , doesnt say specific minimum image just license

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9500-series-switches/data_sheet-c78-738978.html

Advanced telemetry and visibility
Full Flexible NetFlow, EEM


✓


✓


✓

[arno.streuli]

Ok I find the flaw

license boot level network-advantage addon dna-advantage

You have to license the addon dna-advantage !

So in 3 years it won't work anymore, thanks cisco for a software feature on a switch I have to buy the whole package to do DNA on a a server

Crap

[Mark Malone]

Yes everything is service now and perpetual all heading towards SD LAN DNA , but should work on essentials as per last doc post