Catalyst CCP 1.8 software update for WEB UI does not appear to work.
The "web ui only" software upgrade in the Catalyst CCP GUI does not work (v1.8.2) and earlier. It seems to puts the TAR file onto the switch ok and untars it ok into a folder but does not activate it. you can find the folder in the flash: drive as <something>.new e.g. flash:/c2960x-universalk9-mz.152-7.E2/html.new or flash:CCP-CATALYST.new
However the "ip http path" statement does not get updated and continues to point to the previous version.
ip http path flash:CCP-CATALYST
is the location and path statement for the current version of CCP, when the GUI update is run there is no obvious change except for the appearance of a new folder called:-
which contains the new software, but it does not get activated. a copy command can fix this but why does the gui update not work?
The fix is to rename the current web gui folder and then ren the new one.
rename flash:CCP-CATALYST flash:CCP-CATALYST.old
rename flashCCP-CATALYST.new flash:CCP-CATALYST
Where am I going wrong. I am sure this process should be much simpler?
Listen: https://smarturl.it/CCRS8E37Follow us: twitter.com/ciscochampionSometimes, situations require temporary fixes. Sometimes, the network becomes an afterthought in overall office design and planning. In either situation, it may require netw...
In this special edition of the Insider Series, we hear from Cisco partners who have taken steps to be more eco-friendly and sustainable. We hear what inspires ASHRAE, Southwire, Igor, and NTT to create a workplace that is centered around people and how th...
We know that the Type-1 LSA describes the link type connected to the router, the neighbor router and the subnet number.In this topology, assume we dont have a Type-2 LSA, so each router will create its own Type-1 LSA, the Type-1 LSA will describe the neig...
Here are some commonly asked questions and answers to help with your adoption of Cisco DNA Center Wireless. Subscribe to this post to stay up-to-date with the latest Q&A and recommended Ask the Experts (ATXs) sessions to attend.
Q. I have a Cisco Appl...
Why IETF changed and inverted OSPF Type-7 LSA VS Type-5 LSA election In RFC 3101 compared to OLD RFC 1587?Many people learns that the Type-7 LSA and Type-5 election (ON Versus OE routes) depends on RFC 3101 for NSSA published in 2003 and RFC 1587 for NSSA...