I have two 3750 that are stacked and which i will be using as a core. I also have six 2960 which will be connecting to the core. I have three vlans, i.e. vlan 1, vlan 2 and vlan 3. All these Cisco switches will be in vlan 1 but there is a Nortel switch which is on a voice network and which has vlan 2 and 3 and which will also be trunked to the core. My question is how do i setup the 2960 to the core?
Should i just add this command to each 2960 switch but with a different ip address so i can manage it and create a trunk port to the core?
interface Vlan1
ip address 10.1.1.211 255.255.0.0
Any help will be greatly appreciated?
Thanks,
Lake
