Re: Cataylst 9500-40X VSS Distributed Stack Config is not allowed on Provisioned Switch/Line Cards

Intk657 · ‎08-25-2020

I'm configuring VSS on two C9500-40X and when I attempt to add the stackwise-virtual link 1 to Interface Te1/0/37 - 40 I receive the following error.

Distributed Stack Config is not allowed on Provisioned Switch/Line Cards

marce1000 · ‎08-26-2020

- Ref : https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9000/nb-06-cat-9k-stack-wp-cte-en.html

Check/lookup Table 1 from the above mentioned doucment,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

balaji.bandi · ‎08-26-2020

what is the IOS Version running on these device ?

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Intk657 · ‎08-26-2020

I figured out the problem. Each switch had created a second provisioning switch and the interfaces wouldn't take the stackwise command while in provisioning mode. I removed provisioning and was able to make the configurations.