CBS 350 Cross Stack EtherChannel?

[HA CR]

Hi,

I was wondering if the CBS350 series of switches supported Cross Stack Ether Channels?

Does it make a difference to what stack mode you are in,  Hybrid or Native?

Many Thanks,

CR

[balaji.bandi]

Cross Stack Ether Channels?

You mean 2 Stacks join with Etherchannel ?

check below guide help you :

https://www.cisco.com/c/en/us/support/docs/smb/switches/Cisco-Business-Switching/kmgmt2836-Stacking-Guidelines-for-CBS.html

[HA CR]

Given the following scenario:

Two stacked CBS350-16XTS acting as our core.

One CBS350-48P-4X across the building

A server with NICs that support LACP

I would like to connect the server to each 16XTS with these aggregated to support fail over and bandwidth sharing.

Much like the server, I would like to 48P-4X to connect to each of the 16XTS with the link being aggregated.

Many thanks,

CR

[balaji.bandi]

Sure you can do that by doing port-channel or LAG, what problem you see here ?

[HA CR]

I am just making sure that cross chassis aggregation works on these
switches.

I am aware that these models are not quite as fully featured as the catalyst
models.

Many Thanks,

CR

[balaji.bandi]

As per the docs technically they supported LAG.

Sure these are SMB switches with limited compare to enterprise grade Catalyst.