CBS350 Stacking Problem (CBS350-8t-e-2g)

[Lucasptt]

Hi all,

I'm trying to configure two CBS350-8t-e-2g, everything went fine exept when I wanted to stack them.

I have no "Stack Management" in the "Adminstration" section (WEB configuration).

So I tried in CLI, but the device prompt "Unknow command".

Thoses devices should be stackable, so I don't know what to do.

I also tried to update the Firmware but nothing changed.

Does someone ever had the same issue ? If yes how can I fix it ?

(I'm not an experimenced user)

Thank you !

Best Regards

Lucas   

[balaji.bandi · Accepted solution]

check the datasheet - i have not see that model support stacking ( i may be wrong)

https://www.cisco.com/c/en/us/products/collateral/switches/business-350-series-managed-switches/datasheet-c78-744156.html

as per emulator i see that option : (with latest firmware)

https://www.cisco.com/web/fw/tools/cisco-business/emulators/switch/cbs/cbs350/cbs350-48fp-4x/html/cbs/home.html?moduleType=2138

[Lucasptt]

Yes indeed, I don't see my model in the datasheet.

So no stacking on thoses devices I guess.

In all cases, thank you for your fast answer !